VL-A01w-1 / Area Light has been launched. High-brightness with compact design is useful for variety of application especially for OCR /OCV, pattern matching, presence/absence, etc. VL-A01W-1 can't use with our power supply / controller unit because it require trigger input to one of M12 connector pin to turn on the right. However, this design is quite useful for smart camera since it's available to connect directly and the light will be operated by trigger signal from the camera if pin assignment is suitable for our design. Additionally, this lighting will switch operation mode from strobe to continuous automatically depends on trigger signal. Strobe mode will occur when trigger is less than 5mS, If trigger is longer than 5mS the light will be continuous mode with lower brightness. Please contact to us if you have question or request.